Siouxland Trailer Sales

  • 47090 273rd St
  • Harrisburg, SD 57032
  • Call Us: 1 (877) 449-5400
  • http://www.siouxlandtrailersales.com/
Print This Page

2024 SmithCo Side Dump Trailers SX2 SX2 4034 L

Information

2024 SmithCo Side Dump Trailers SX2 SX2 4034 L

SmithCo’s SX2 Tandem Axle side dump trailer is one of our most popular and versatile models. The SX2-4034 is the most commonly produced size for tandem axle units, and with a 204" wheelbase tractor it can achieve 80,000 legal gross in all states under the Federal Bridge Formula.

Shorter tandem axles trailers are produced to handle maneuvering issues, or combined with converter dollies for doubles operations. Common models for these shorter tandem axle trailers are the SX2-3024 and SX2-3327.

Features may include:
  • 30’ to 42’ foot frame lengths
  • Stockpile or windrow
  • Watertight; no leaks
  • Low load height
  • Dumps toward either side
  • AR400 Steel Tub, One Piece Floor
  • 80/100 KSI Steel Frames
  • Self-Aligning, Spherical Bearing Hinges
  • External Column Tub Supports
  • No Center Tub Divider
  • Shot Blast Paint Prep
  • Polyurethane Paint

Photos

Highlights

  • Harrisburg, South Dakota
  • 2024
  • SmithCo Side Dump Trailers
  • SX2 SX2 4034 L
  • Fenders: Front & Rear, 1/4" Synthetic, 7 Degree Slope
  • Available
  • 8’ 6”
  • 8' 3" at Tub side, 9' 6" at Center

Specifications

  • 2024
  • SmithCo Side Dump Trailers
  • SX2
  • SX2 4034 L
  • Dump
  • Frame: 39’ 5” | Tub: 34’
  • 8’ 6”
  • 8' 3" at Tub side, 9' 6" at Center
  • 2" Kingpin, 18" Setting, Replaceable Type
  • 25,000 lbs
  • Waterfull: 23 cu yd
  • 31 cu yd
  • Fenders: Front & Rear, 1/4" Synthetic, 7 Degree Slope
  • 80/100 KSI, Fabricated Steel I-Beam
  • 2
  • 12 Volt ICC w/ Sealed Harness
  • Air Ride; Four Spring
  • Min. Tractor Hydraulic Reqs: 25-30 GPM | 2,600-2,800 PSI | 10 Gallon Reservoir
  • Steel Disc, 8.25 x 22.5 (8)
  • 11R 22.5 G Radial Tires (8)
  • ABS 2S1M Anti-Lock Brake System | 16 ½” x 7”
  • Landing Gear: Two Speed, Non-Load Bearing | Bumper: Push Bar Type, Bolt-On | Cylinders: 3500 PSI, 5" bore | Hinges: Self-Aligning, Spherical Bearing Type (greaseable) | Hubs: 10 Hole, Hub Piloted | Drums: Outboard Mount, Cast Steel | Mud Flap: (2) Polyline Anti-Spray Splash Guard w/SmithCo name | Paint: Polyurethane, any combination of gray, white or black
  • Tub: 1/4" Thick, AR400 Steel (or equivalent) | External column supports, no center tub divider