2024 Manac Log Trailers Robust Sloped
- Year 2024
- Make Manac
- Model Log Trailers
2024 Manac Log Trailers Robust Sloped
2024 Manac Log Trailers Robust Sloped
Features may include:- Plug welded bunks with floating structure
- Fabricated high-strength steel pockets
- Floor integrated to frame
- Ultralight galvanized curved stakes
- Plug welded coupler plate structure with draining holes
Dimensions
Length
40'-51'
Width
102"
Deck Height
61" at front and 51" at rear
Height
Coupler: 48" | Wedge: Frame with a 10" slope from front to rear with camber
Kingpin Setting
Bolted at 30"-42"
Coupling
3/8" plug welded reinforced structure
Dimensions
Gooseneck: 11" high, with integrated nose ramp and 48" straight behind king pin
Chassis
Chassis
Crossmembers: 4" I beams 80 000 psi steel, between main beams
Electric
Electrical
Main System: Grote Ultra Blue LED sealed lights & wiring harness system meets Transport Canada and DOT requirements | Front Plug: 7 way (SAE J560) | Front Additional Plug: 7 way (ISO 3731), for auxilary functions | Rear Connectors: 4 way
Lights and Safety
Lighting
LED shock proof lights with polycarbonate lenses with a total of 10 rear tail lights on pup unit only | Back-up: 2 sealed beam spot lights in an angled grommet, 1 each side
Suspension
Suspension
Hendrickson HT | air ride
Brakes
Brake System Type
16 1/2" x 7" extended life lining
Hub Type
10 stud disc, balanced drums, outboard mount
ABS Option
Wabco ABS 2S-1M
Wheels & Tires
Wheels
Oil or Grease
Tires, Rear Specification
Continental 22.5 radial
Features
Features
Flanges: 3/8" x 6", 100 000 psi steel| Lateral bracing: Torque tube between main beams | Front End: 3/16" thick formed plate, 80 000 psi steel with glad hand protectors | Bumper: Forestry type, tubing with integated push & pull plates installed on bumper uprights | Landing Gear: Holland with mounting plate | Fenders: Checker plate 1/8", above truck wheels, sloping on lead unit | Bunks: 5 fixed sets of bunks with fabricated boxes. Located at 60" and 72" c/c. | Stakes: Qty: 20, ultra light, galvanized, bottom 4" x 4", curved, 80,000 & 100,000 psi steel | Risers: Two total (1 on lead and 1 on pup) aluminum extrusion 3" x 2" for a height equal to the drop | Rims: Hub piloted steel | Mudflaps: Three fixed sets, rubber with Manac logo, located ahead of landing gear, at rear bumper and front | Gladhands: Additional set located on lead unit by rear bumper and additional set fixed by landing gear on pup unit with coil hoses | Paint: Shot blasted, one coat of epoxy primer and two polyurethane acrylic top coats with gravel guard applied to the suspension hangers| Decals: Conspicuity tape complies with DOT and CMVSS standards | Winches:10 total 2 fixed and recessed on road side between first set. 8, fixed and tilted 45 degrees, located road side between bunks all with handles | Lashing: Rings Qty: 12, lashing pockets on the opposite side of winches, 6 on the lead and 6 on the pup | Retaining Chains: On ground axles | Bunk Angles: Steel ridge 1/2" x 1 1/2" installed on last bunk to hold tree length lumber
Construction Material
Web:1/4" plate in king pin area and the remaining in 3/16", 80 000 psi steel with parachute shaped holes to lighten trailer | Floor: Checker plate 1/8" between main beams, full length (no wood flooring at all)