2024 Manac Lowbeds 55 Ton
- Year 2024
- Make Manac
- Model Lowbeds
2024 Manac Lowbeds 55 Ton
2024 Manac Lowbeds 55 Ton
Features may include:- Detachable gooseneck activated by 2 hydraulic 9" diameter vertical cylinders
- Coupling guide and pin on gooseneck
- Accesible connection plates with air and electrical
- Variable coupler heights 48", 50'' and 52"
- Fabricated crossmembers between main beams for increased storage space
Dimensions
Length
53', main deck 26' mid section
Width
102" side rail to side rail
Deck Height
Main deck, 6" under center beams, 22" above ground
Height
coupler: 50"
Kingpin Setting
16" and removeable from above
Dimensions
Gooseneck: Taper beam, 84" clear behind king pin. Detachable with 2 hydraulic vertical cylinders, 9" diameter with hydraulic operated gooseneck locks
Coupling
5/16" plug welded structure, 100 000 psi steel
Chassis
Chassis
Crossmembers: Fabricated "H" beams, 10" @ 12 lbs/ft, 28" c/c | Side Rail: Fabricated H-beams, 1/2" x 4" x 15" high, web 3/16" full length, 100 000 psi steel
Electric
Electrical
Main System: Grote Ultra Blue LED sealed lights & wiring harness system meets Transport Canada and DOT requirements | Front Plug: 7 way (SAE J560) at front and 7 way at deck level
Lights and Safety
Lighting
LED shock proof lights with polycarbonate lenses | extenable-lights: 4 lights, double faced, amber Grote #53023 with coiled wiing
Suspension
Suspension
Fixed, Hendrickson (1) HT-250YS-9 and (2) HT-250US-9
Brakes
Brake System Type
16 1/2" standard, extended life lining
Hub Type
10 stud disc, balanced drums, outboard mount
ABS Option
Wabco ABS 2S-1M
Wheels & Tires
Wheels
Oil or Grease
Tires, Rear Specification
Continental 22.5 radial tires
Hydraulics
Hydraulic Type
Coupling: 1 male pressure and 1 female return, quick coupling, 1" diameter located curb side
Features
Features
Flanges: Main beams 3/4" x 8", 16" high, 100,000 psi steel | Outriggers: 24 fabricated, 12 each side, 9" wide including (4) 8" wide x 2 1/4" thick x 12' long boards with storage in center | Front End: Formed steel, between two main beams | Bumper: Steel formed model, including supports and flag, wide load sign support and warning strobe lamp support near 4-way rear connector and warning stobe lamp support near 4 way rear connector| | Rear Connectors: 4 way and 7 way for flip-up axle option | Rims: Hub piloted steel, aluminum available | Mudflaps: Two sets rubber with Manac logo at rear of gooseneck and rear bumper | Paint: Shot blasted, one coat of epoxy primer and two acrylic polyurethane top coats | Decals: Conspicuity tape complies with DOT and CMVSS standards | Lashing Rings: 22 heavy-duty D-rings, 9 bent style each side of main deck and 2 on gooseneck| Storage Box: 1 between two beams of the gooseneck | Flags: 6 flag holders, 4 on extendable lights and 2 on rear bumper, flags included | Rear Beams: Qty 4, 102" wide, located between tires, 17" wide, 10 000 lbs capacity each, including lashing ring each end | Fenders: For front, protection only, 8'-0" wide, 1/8" anti-skid steel welded to the gooseneck with one pair of mudflaps and supports for flags | Rear Connectors: 4 way | Stinger : One leg fabricated and activated with 4" diameter cylinder resting on truck frame | Sign: One "D" long wide road sign red and white, removeable, 12" x 96" in aluminum
Construction Material
Web: 5/16" plate 100 000 psi steel and 1/4" plate 80 000 psi steel in rear section | Floor: Oak 2 1/4" thick, covered with one coat of linseed oil, 1/2" over the frame on the side, no floor between main frame