2018 Brenner Tank Trailer Asphalt
- Year 2018
- Make Brenner
- Model Tank Trailer
2018 Brenner Tank Trailer Asphalt
2018 Brenner Tank Trailer Asphalt
Whether designed for 200 or 500 degrees, Brenner asphalt tank trailers are built to last. The durability, ultra-light features provide lower maintenance and greater payload in an easy-to-operate tank—all you need to haul with confidence and peace of mind.
Brenner asphalt tank barrels are built from the industry’s widest sheet material to prevent cracks and corrosion, and minimize seams. Precision robotic welding guarantees a cleaner finish and stronger tank. The reliable heat pipe, channel heat systems and faster drains mean less maintenance. And, with the best fit-up in the industry and an upper frame longmember that extends to the shell, its structural integrity sets the standard.
Dimensions
Dimensions
Barrel Shape: Straight Round | Hose Carrier: (2) 8" x 21' long aluminum hose tube (1 curbside and 1 roadside) | Vent: 25 psi, 30 psi and 35 psi available | Emergency Valve: 4" x 3" 90°, 316 stainless steel external or internal, hydraulic valve | Manhole: 20" aluminum opening with 6-lug wingnut hold-downs | Pressure Package: 1" SS ball valve, blanked Chicago coupler and pressure gauge (0-60 psi)
Cleaning Area
Customer specified
Capacities
Payload Capacity
2,500-11,500 Gallons Nominal
Chassis
Chassis
Material: Aluminum
Ladder Style
Stainless steel, mounted to walkway, bolted top and bottom
Lights and Safety
Lighting
Harness with LED grommet-mount system complying with FMVSS and CMVSS minimum requirements
Suspension
Suspension
Air ride suspension. Spring suspensions also available
Brakes
Brake System Type
4S/2M ABS-RSS extended service drum brake system rated to 20,000 lbs. 23,000 lbs. and 26,000 lbs. available.
Features
Features
Temperature: -20° F to 250°F | Compartments: 1-5 Compartments | Service Classification: On road and off road servicer | DOT Code: DOT407, TC407, & Non-code | Spill Dam: DOT compliant stainless steel rollover protection/spill dam | Vapor Recovery: Provisions for VR (3" NPS, capped) | Pressure Unload: 1" full length or half -length system is available | Walkway: 12" platform mounted on aluminum brackets, ladder side, at spill-dam. Extended walkways available. | Fenders: Aluminum contour fenders with anti-sail/anti-spray mudflaps front and rear | Landing Legs: 2-speed, sealed gearbox with low temperature grease, with load bearing sand shoes and curbside crank | Subframe: Aluminum sub frame | Tire Inflation: Customer specified | Paint: Steel parts will be painted black | Underride: Stainless steel if required
Warranty
Warranty
3 year warranty